Globe valves

Globe valves are generally used for throttling operations. By simply rotating the handwheel, the rate at which the commodity flows through the valve can be adjusted to any desired level. Having the valve seat parallel to the line of flow is an important feature of the globe valve. This feature makes the globe valve efficient when throttling commodities as well as yielding minimal disk and seat erosion.

Euroguarco globe valve product range covers construction by OS&Y, Z-type, Y-type or angle-construction type, conforming to API 602, ASME B16.34, ASTM, ANSI, EN, DIN, BS. Materials are mostly forged and cast steel or alloys.

Various optional designs are available: fire safe design, cryogenic service, sour service, stem extended, etc.

Main features:

Globe valves are a linear motion valves used to stop, start, and regulate the fluid flow. The globe valve disk can be removed entirely from the flow path, or it can completely close the flow path. During the opening and closing of the valve, the disc moves perpendicularly to the seat. Leakage from the globe valve seat is less as compared to the gate valve, mainly due to right angle contact between the disc and seat ring, which allows tighter seal between seat the disk.


  • Construction: screwed bonnet, bolted bonnet, pressure-seal bonnet;
  • Size: 1/2” up to 36”;
  • Class rating: ASME 150# to 2500# (PN, API and other Pressure Class Valves available on request);
  • End connection: threaded NPT, SW, BW and flanged;
  • Materials: Carbon Steel, Stainless Steel, Duplex & Super Duplex Steel, Iron and Special Alloys;
  • Seating: Soft Seated or Metal Seated;
  • Disc: Plug type, Ball type, Needle type, Composite type;
  • Operator: manual – handwheel, gear or motorized.
  • Euroguarco S.p.A.
  • Via Terralba Loc. Pietralba
  • 19021 Arcola (La Spezia), Italy
  • Iscriz. Reg. Imprese CCIAA
    Riviere di Liguria n. 00933640112
  • P.IVA 00933640112
  • Cap. Soc. euro 1.350.000,00 i.v.
  • Informativa sulla privacy