Check valves

Check valve is a device that only allows the flow of fluids in one direction (unidirectional). Since they only allow media flow in one direction, they are commonly referred to as ‘one-way valves’ or ‘non return valves.’ The main purpose of a check valve is to prevent backflow in the system

Euroguarco manufacture check valves, in forged or cast steel and alloys, by split disc, swing, piston, ball, needle, nozzle construction type.

Construction conforming to API 594, API 602 ASTM, ANSI, ASME, EN, DIN, BS.

Various optional designs are available: cryogenic service, sour service, metal-to-metal, wafer, lug, semi-lug, dual plate, T or Y Pattern, etc.

Main features:

  • Construction: full or reduced port design
  • Size: 3/8” up to 36”;
  • Class rating: ASME 150# to 2500# (PN, API and other Pressure Class Valves available on request);
  • End connection: Wafer, Flanged, SW, BW and threaded;
  • Materials: Carbon Steel, Stainless Steel, Duplex & Super Duplex Steel, Iron and Special Alloys all in Cast and Forged production type;
  • Seating: Soft Seated or Metal Seated.
  • Iscriz. Reg. Imprese CCIAA
    Riviere di Liguria n. 00933640112
  • P.IVA 00933640112
  • Cap. Soc. euro 1.350.000,00 i.v.
  •  
  • Informativa sulla privacy